Neo80 CU by Qwertykeys

Specifications

• Typing angle：8 degree
• Front height：18 mm
• Size：80% TKL, 355.5mm * 134 mm
• Layout: WK/WKL
• Weight： Around 4.5 kg after assembly

Tri-mode ANSI Hotswap PCB (Non-flex Cut)

• 1.6mm thick
• Support USB-C, Bluetooth, and 2.4GHz connection
• Support only ANSI layout
• NKRO
• Polling rate: 1000Hz in wired and 2.4GHz mode; 125Hz in BT mode
• NO Per-key RGB

Tri-mode ISO Hotswap PCB (Non-flex Cut)

• 1.6mm thick
• Support USB-C, Bluetooth, and 2.4GHz connection
• Support only ISO layout
• NKRO
• Polling rate: 1000Hz in wired and 2.4GHz mode; 125Hz in BT mode
• NO Per-key RGB

Wired Hotswap PCB (Non-flex Cut)

• 1.6mm thick
• USB-C connection only
• Support only ANSI layout
• NKRO
• Polling rate: 1000Hz
• NO Per-key RGB

Solder PCB (Non-flex Cut)

• 1.6mm thick
• Mill-max compatible
• USB-C connection only
• Support both ANSI and ISO layout
• NKRO
• Polling rate: 1000Hz
• NO Per-key RGB

Keyboard Case

• For orders with tri-mode PCBs, two 2200 mAh batteries come pre-installed in the battery compartment
• For orders with wired PCBs, two stainless steel fillers come pre-installed in the battery compartment
• For orders with solder PCBs, two foam fillers come pre-installed in the battery compartment. （If you purchase the stainless steel battery compartment fillers in the extra part page, foam fillers will no longer be included.）

PCB kit

• PCB of your choice
• 1x PE sheet
• 1x PCB Foam
• Tri-mode PCB comes with a 2.4Ghz dongle

Plate of your choice

Poron case foam

PCB Daughterboard and magnetic connectors - installed

9x Silicone Gaskets, 9x long Poron gaskets, 18x short Poron gaskets and Top-mount mounting screws

4x Positioning silicone(grey)

Rubber feet in 2 colors

Backup screws

Free Gifts:（Disclaimer: If any of these gifts is missing or is damaged, they will not be re-shipped or replaced.）

• Keyboard carrying case
• Keyboard pouch
• 1x Keycap & Switch puller
• 1x Screwdriver
• 1 set of PCB clip-in NeoStab
• USB-C cable